Solutions for Every Rooftop Equipment Securement Need
Solar
Snow Retention
Mechanical, Electrical & Plumbing
Safety, Access
& Egress
Communications
Rooftop Accessories
HVAC Tie Down
HVAC Tie Down Kit
The HVAC Tie Down Kit Included:
- (2 ) 2400 Series U-Anchors, match roofing material type and brand.
- (1) 12 ft, 3/16”, ss wire rope. (Other wire rope options available upon request.)
- (2) 30/30 Brackets
- (1) Turnbuckle attached to 12 ft, 3/16 cable
- (2) Corner brackets (adhesive tape included)
- (2) 3/16 Wire Rope clips
- (2) 3/8 Flange Nuts
- (2) 3/8 Flat Washers
- (1) Cable Thimble
AP Solution HTD 0640 HVAC Tie-Down secures your rooftop unit to the structure. Tie-downs can be installed with the system or retrofitted as needed.
Winds as light as 50-60 mph can dislodge your outdoor unit from its base, causing damage to the unit and your roof. The HTD 0640 protects your unit from damage and prevents costly repairs. The U-Anchor™ 2000 Series Attachments by Anchor Products have proven effective
in securing HVAC equipment in harshest conditions caused by earthquakes or hurricanes.
HVAC SYSTEMS SECUREMENT
Note: ” (2) U Anchors included in kit”
FEATURES:
» Attaches safely to single-ply, asphalt and coated roofs without damaging the roof using a U-Anchor 2000 Series Attachment.
» The ultimate force resistance of each 2000 series U-Anchor is approximately 2,713 lbs. in tension and 4,339 lbs. in shear.
» The 3/16” stainless steel 7×19 aircraft cable offers a breaking strength of approximately 3700 lbs. (Otherwire rope options available upon request.)
» The U-Anchor can be used with all HVAC Equipment.
» All exposed components and hardware are stainless steel, aluminum, or other non-corrosive materials. U-Anchors
ADVANTAGES
» Quick and easy install.
» Stainless steel straps and cables ensure that the metal will not corrode or deteriorate in the harshest of environments.
» The HVAC Tie-Down Securement using the U-Anchors will not void the roof warranty.
The ultimate force resistance of each U-Anchor™ is approximately 3000 lbs. in tension and 4000 lbs. in shear. The 3/16”, 7×19 stainless steel wire rope offers a breaking strength of approximately 3700 lbs. (Other wire rope options available upon request.) The U-Anchor can be used with all HVAC Equipment. All exposed components and hardware are stainless steel, aluminum, or other non-corrosive materials.
Features:
- Attaches safely to single-ply, asphalt and coated roofs without damaging the roof using a U-Anchor 2000 Series Attachment
- U-Anchors match roofing material type and brand
- Install anytime of the year
- The force resistance of each U-Anchor is approximately 3000 lbs. in tension and 4000 lbs. in shear
- The 3/16”, 7×7 stainless steel wire rope offers a nominal breaking load strength of 3700 lbs. (Other wire rope options available upon request.)
- The U-Anchor can be used with all manufacturers HVAC Equipment
- Bracket, Straps, and cables are made of stainless steel and will not corrode on the roof
- U-Anchor is accepted by all major North American roofing manufacturers allowing warranties to remain in effect
The HVAC Tie-Down Solution consists of stainless steel straps and cables that ensures the metal will not corrode or deteriorate in case of any extreme weather conditions.
HVAC Tie Down
HVAC Tie Down Kit
Have a specfic membrane, or lenth. Just list your requirments in the Quote and will get back with you.
The HVAC Tie Down Kit Excludes
- (2 )2400 Series U-Anchors, match roofing material type and brand.
- (1) 12 ft, 3/16”, stainless steel wire rope. (Other wire rope options available upon request.)
- (2) 30 x 30 Brackets
- (1) Turnbuckle attached to 12 ft, 3/16 cable
- (2) Corner brackets (adhesive tape included)
- (2) 3/16 Wire Rope clips
- (2) 3/8 Flange Nuts
- (2) 3/8 Flat Washers
- (1) Thimble
AP Solution HTD 0640 HVAC Tie-Down secures your rooftop unit to the structure. Tie-downs can be installed with the system or retrofitted as needed.
Winds as light as 50-60 mph can dislodge your outdoor unit from its base, causing damage to the unit and your roof. The HTD 0640 protects your unit from damage and prevents costly repairs. The U-Anchor™ 2000 Series Attachments by Anchor Products have proven effective
in securing HVAC equipment in harshest conditions caused by earthquakes or hurricanes.
HVAC SYSTEMS SECUREMENT
Note: “U anchors are not include in the kits”
FEATURES:
» Attaches safely to single-ply, asphalt and coated roofs without damaging the roof using a U-Anchor 2000 Series Attachment.
» The ultimate force resistance of each 2000 series U-Anchor is approximately 2,713 lbs. in tension and 4,339 lbs. in shear.
» The 3/16” stainless steel 7×19 aircraft cable offers a breaking strength of approximately 3700 lbs. (Otherwire rope options available upon request.)
» The U-Anchor can be used with all HVAC Equipment.
» All exposed components and hardware are stainless steel, aluminum, or other non-corrosive materials. U-Anchors
ADVANTAGES
» Quick and easy install.
» Stainless steel straps and cables ensure that the metal will not corrode or deteriorate in the harshest of environments.
» The HVAC Tie-Down Securement using the U-Anchors will not void the roof warranty.
The ultimate force resistance of each U-Anchor™ is approximately 3000 lbs. in tension and 4000 lbs. in shear. The 3/16”, 7×19 stainless steel wire rope offers a breaking strength of approximately 3700 lbs. (Other wire rope options available upon request.) The U-Anchor can be used with all HVAC Equipment. All exposed components and hardware are stainless steel, aluminum, or other non-corrosive materials.
Features:
- Attaches safely to single-ply, asphalt and coated roofs without damaging the roof using a U-Anchor 2000 Series Attachment
- U-Anchors match roofing material type and brand
- Install anytime of the year
- The force resistance of each U-Anchor is approximately 3000 lbs. in tension and 4000 lbs. in shear
- The 3/16”, 7×7 stainless steel wire rope offers a nominal breaking load strength of 3700 lbs. (Other wire rope options available upon request.)
- The U-Anchor can be used with all manufacturers HVAC Equipment
- Bracket, Straps, and cables are made of stainless steel and will not corrode on the roof
- U-Anchor is accepted by all major North American roofing manufacturers allowing warranties to remain in effect
The HVAC Tie-Down Solution consists of stainless steel straps and cables that ensures the metal will not corrode or deteriorate in case of any extreme weather conditions.
Have specific length not listed. Not a problem , just click get a “Quote button” and will get back with you.