Solutions for Every Rooftop Equipment Securement Need
Solar
Snow Retention
Mechanical, Electrical & Plumbing
Safety, Access
& Egress
Communications
Rooftop Accessories
Guy Wire Tie Down Kit
Guy Wire Tie Down Kit Includes:
(1) 2400 Series U-Anchors, match roofing material type and brand
(1) 10 ft, 3/16”, stainless steel wire rope. (Other wire rope options available upon request.)
(1) 30/30 Brackets
(1) Turnbuckle attached to 10 ft, 3/16 cable
(2) 3/16 Wire Rope clips
(2) 3/8 Flange Nuts
(2) 3/8 Flat Washers
(1) Thimble
The AP Solution GWK 0600 Guy Wire Kit from Anchor Products keeps your expensive rooftop equipment from being displaced and damaged, or worse, flying across the roof creating expensive leaks and consequential damages. The U-Anchor™ 2000 Series Attachment by Anchor Products and the GWK 0600 has demonstrated performance in the harshest environments securing rooftop equipment in high wind and seismic conditions.
Features:
Note: “(1) 2400 U-anchor is include in the kit”
- Attaches safely to TPO, PVC, EPDM, Asphalt and coated roofs without damaging the roof using a U-Anchor™ 2000 Series
- U-Anchors match roofing material type and brand
- Each U-Anchor 2000 Series attachment can resist approx. 3000 lbs. in tension and 4000 lbs. in shear
- U-Anchor is approved with all North American roofing manufacturer’s allowing warranties to remain in effect
- All exposed components are made of stainless steel and will not corrode on the roof
- 30/30 Tie Down Bracket* – (3/16” 304 SS with 3 holes/ two slots)
Stainless Steel Flanged Nut and Flat Washers
3/16”, 7×19 Stainless Steel Wire Cable**
Mechanical Crimp(s)
Turnbuckle
Cable Thimble*Available in 3/8” or 3/4” (also available as an 3/8” HVAC GW Kit)
**Standard length: 10 ft. or 12 ft. (customizable longer lengths quoted by request.) - Cables with GWK 600 Kit come standard at 10’. Custom length of cables up to 100’ can be quoted and available by request
- 30/30 Tie Down Bracket* – (3/16” 304 SS with 3 holes/ two slots)
Stainless Steel Flanged Nut and Flat Washers
3/16”, 7×19 Stainless Steel Wire Cable**
Mechanical Crimp(s)
Turnbuckle
Cable Thimble*Available in 3/8” or 3/4” (also available as an 3/8” HVAC GW Kit)
**Standard length: 10 ft. or 12 ft. (customizable longer lengths quoted by request.) - 30/30 Tie Down Bracket* – (3/16” 304 SS with 3 holes/ two slots) Stainless Steel Flanged Nut and Flat Washers 3/16”, 7×19 Stainless Steel Wire Cable** Mechanical Crimp(s) Turnbuckle Cable Thimble *Available in 3/8” or 3/4” (also available as an 3/8” HVAC GW Kit) **Standard length: 10 ft. or 12 ft. (customizable longer lengths quoted by request.)
* Also available in custom lengths*
Guy Wire Kit
Guy Wire Tie Down Kit Includes:
(1) 2400 Series U-Anchors, match roofing material type and brand
(1) 12 ft, 3/16”, ss wire rope. (Other wire rope options available upon request.)
(1) 30/30 Brackets
(1) Turnbuckle attached to 12 ft, 3/16 cable
(2) 3/16 Wire Rope clips
(2) 3/8 Flange Nuts
(2) 3/8 Flat Washers
(1) Thimble
The AP Solution GWK 0600 Guy Wire Kit from Anchor Products keeps your expensive rooftop equipment from being displaced and damaged, or worse, flying across the roof creating expensive leaks and consequential damages. The U-Anchor™ 2000 Series Attachment by Anchor Products and the GWK 0600 has demonstrated performance in the harshest environments securing rooftop equipment in high wind and seismic conditions.
Features:
Note: “(1) 2400 U-anchor is include in the kit”
- Attaches safely to TPO, PVC, EPDM, Asphalt and coated roofs without damaging the roof using a U-Anchor™ 2000 Series
- U-Anchors match roofing material type and brand
- Each U-Anchor 2000 Series attachment can resist approx. 3000 lbs. in tension and 4000 lbs. in shear
- U-Anchor is approved with all North American roofing manufacturer’s allowing warranties to remain in effect
- All exposed components are made of stainless steel and will not corrode on the roof
- 30/30 Tie Down Bracket* – (3/16” 304 SS with 3 holes/ two slots)
Stainless Steel Flanged Nut and Flat Washers
3/16”, 7×19 Stainless Steel Wire Cable**
Mechanical Crimp(s)
Turnbuckle
Cable Thimble*Available in 3/8” or 3/4” (also available as an 3/8” HVAC GW Kit)
**Standard length: 10 ft. or 12 ft. (customizable longer lengths quoted by request.) - Cables with GWK 600 Kit come standard at 10’. Custom length of cables up to 100’ can be quoted and available by request
- 30/30 Tie Down Bracket* – (3/16” 304 SS with 3 holes/ two slots)
Stainless Steel Flanged Nut and Flat Washers
3/16”, 7×19 Stainless Steel Wire Cable**
Mechanical Crimp(s)
Turnbuckle
Cable Thimble*Available in 3/8” or 3/4” (also available as an 3/8” HVAC GW Kit)
**Standard length: 10 ft. or 12 ft. (customizable longer lengths quoted by request.) - 30/30 Tie Down Bracket* – (3/16” 304 SS with 3 holes/ two slots) Stainless Steel Flanged Nut and Flat Washers 3/16”, 7×19 Stainless Steel Wire Cable** Mechanical Crimp(s) Turnbuckle Cable Thimble *Available in 3/8” or 3/4” (also available as an 3/8” HVAC GW Kit) **Standard length: 10 ft. or 12 ft. (customizable longer lengths quoted by request.)
* Also available in custom lengths*